📄️ Setup Tab
A place for basic settings and flight controller information. The setup tab is the first tab you see
📄️ Ports Tab
You will have multiple different devices and peripherals connected to your flight controller UART ports,
📄️ Configuration Tab
This is where most of the main configuration of your flight controller will be done. This includes things
📄️ Power & Battery Tab
Set up all your power and battery related settings. Set the voltage and current sensor sources and
📄️ Failsafe Tab
Sorry; this Wiki page has not yet been written.
📄️ Presets Tab
Presets offer an easy way to configure your settings. They are short snippets of CLI commands that can be
📄️ PID Tuning Tab
Sorry; this Wiki page has not yet been written.
📄️ Receiver Tab
A receiver is a device that (as its name suggests) receives data from a transmitter, usually your
📄️ Modes Tab
Modes are used to enable or disable features and trigger FC actions using AUX channels switches. Modes are enabled
📄️ Adjustments Tab
Sorry; this Wiki page has not yet been written.
📄️ Servos Tab
Servos Tab
📄️ GPS Tab
Sorry; this Wiki page has not yet been written.
📄️ Motors Tab
Configure motor and ESC settings. Change motor direction and mixing, and set up advanced telemetry and flight features
📄️ OSD Tab
Betaflight OSD allows the pilot to view in-flight information and telemetry data overlaid onto their FPV camera feed.
📄️ Video Transmitter Tab
Sorry; this Wiki page has not yet been written.
📄️ Race Transponder Tab
Sorry; this Wiki page has not yet been written.
📄️ Led Transponder Tab
Sorry; this Wiki page has not yet been written.
📄️ Sensors Tab
Sorry; this Wiki page has not yet been written.
📄️ Tethered Logging Tab
Sorry; this Wiki page has not yet been written.
📄️ Blackbox Tab
Sorry; this Wiki page has not yet been written.
📄️ Firmware Flasher Tab
Here you update your firmware and select the features you require for you build.
📄️ CLI Tab
BetaFlight has a command line interface (CLI) that can be used to:
📄️ Modes Tab
Sorry; this Wiki page has not yet been written.